AbstractsOther

ZnSe ceramics and phosphate glasses for optical applications in the visible and infrared ranges

by Gang Zhou




Institution: Rennes 1
Department:
Year: 2014
Keywords: Céramique; Verres de phosphates; Infrarouge; Synthèse par voie hydrothermale; Mécanosynthèse; Hot-Pressing; Spark plasma sintering; Durabilité chimique; Coordonnées de chromaticité; Ceramic; Phosphate glasses; Infrared; Hydrothermal synthesis; Ball milling; Hot-Pressing; Spark plasma sintering; Chemical durability; Chromaticity coordinates;
Record ID: 1147742
Full text PDF: http://www.theses.fr/2014REN1S071/document


Abstract

Une étude en deux parties a été effectuée sur la préparation et la caractérisation de céramiques de ZnSe et de verres de phosphate à des fins optiques. Pour préparer des poudres de ZnSe, deux voies de synthèse ont été utilisées: i) hydrothermales; ii) le broyage à billes. La taille des particules ainsi que leur morphologie a été analysée par différentes techniques (DRX, MEB…). Ensuite, deux technologies de frittage, pressage à chaud (HP) et frittage flash (SPS), ont été mises en œuvre pour obtenir des échantillons massifs de ZnSe optiquement transparents. La meilleure transmission obtenue dans le domaine du moyen infrarouge, pour les échantillons HP et SPS, est supérieure à 50% et 40% respectivement. Pour obtenir des verres de phosphate avec une grande durabilité chimique, des cations avec une intensité de champ élevée tels que Nb5+ et Ti4+ ont été incorporés dans un verre de phosphate. La transparence dans le domaine du visible a été obtenue en utilisant de petites quantités d'agents d'oxydation tels que les sulfates ou les nitrates. L’utilisation de la spectroscopie par réflectance diffuse a permis de déterminer les coordonnées chromatiques afin d’évaluer le bénéfice de ces ajouts. A two-part study was conducted on the preparation and characterization of ZnSe ceramic and phosphate glasses for optical applications in the visible and infrared range. To prepare ZnSe powders, two synthetic routes were used: i) hydrothermal; ii) ball milling. The size and morphology of synthesized powders were analyzed using different techniques (XRD, SEM…). Then two sintering technologies, hot pressing (HP) sintering and spark plasma sintering (SPS) sintering have been implemented to obtain optically transparent ZnSe bulk samples. The best transmission obtained in the mid-infrared range, using HP and SPS, is greater than 50% and 40% respectively. To synthesize phosphate glasses with a high chemical durability, cations with high field strength such as Nb5+ and Ti4+ were incorporated into a phosphate matrix. The transparency in the visible range was obtained using small amounts of oxidation agents such as sulfates or nitrates. The use of diffuse reflectance spectroscopy led to determination of the chromaticity coordinates to evaluate the benefit of these additions.