AbstractsEngineering

Numerická řešení problematiky EMC malých letadel

by Vladimír Šeděnka




Institution: Brno University of Technology
Department:
Year: 0
Keywords: elektromagnetická kompatibilita; metoda konečných prvků; vyzařované pole s vysokou intenzitou; HIRF-SE; Amelet-HDF; HDF; pohlcujících okrajové podmínky; disperze; anizotropie; aproximace tenkého drátu; electromagnetic compatibility; finite element method; high intensity radiated pulse; HIRF-SE; Amelet-HDF; HDF; absorbing boundary condition; dispersion; anisotropy; thin wire approximation
Record ID: 1097446
Full text PDF: http://hdl.handle.net/11012/24964


Abstract

Disertace popisuje současné problémy v certifikaci malých letadel, které by se měly v budoucnu řešit numerickým modelováním. Tento postup má zefektivnit návrh a zlevnit certifikaci letadel. Práce je úzce spjata s projektem HIRF-SE, který se problematikou certifikace letadel numerickými metodami zabývá. Podstatná část práce je věnována popisu dvou modulů pro platformu HIRF-SE: řešič BUTFE založený na metodě konečných prvků v časové oblasti a budicí nástroj BUTFE_EXC. Práce popisuje řešení pohlcujících okrajových podmínek, modelování disperzních a anizotropních materiálů a aproximaci tenkých drátů. Speciální pozornost je věnována řešení aproximace tenkých drátů s ostrými ohyby, jejíž současná formulace způsobuje překryvy mezi jednotlivými segmenty drátu.; The dissertation describes actual problems in certifying small airplanes, which are to be solved by numerical modeling of the airplanes. The work is closely linked to the European project HIRF-SE, which deals with this problem. The essential part of the work is devoted to describing design of two modules within the HIRF SE framework: time-domain finite-element solver BUTFE and its excitation module BUTFE_EXC. The thesis describes solution of absorbing boundary conditions, dispersive media, anisotropy and thin wire approximation. Special attention is devoted to a proper approximation of thin wires with sharp bends. Current implementation of the approximation leads to overlaps of wire segments.