AbstractsPhysics

Evaluation of AERMOD and CALPUFF air dispersion models for livestock odour dispersion simulation

by Yuguo Li




Institution: University of Saskatchewan
Department:
Year: 2010
Keywords: AERMOD; CALPUFF; Livestock odour dispersion simulation; Air dispersion model
Record ID: 1842945
Full text PDF: http://hdl.handle.net/10388/etd-09292009-171346


Abstract

Impact of odour emissions from livestock operation sites on the air quality of neighboring areas has raised public concerns. A practical means to solve this problem is to set adequate setback distance. Air dispersion modeling was proved to be a promising method in predicting proper odour setback distance. Although a lot of air dispersion models have been used to predict odour concentrations downwind agricultural odour sources, not so much information regarding the capability of these models in odour dispersion modeling simulation could be found because very limited field odour data are available to be applied to evaluate the modeling result. A main purpose of this project was evaluating AERMOD and CALPUFF air dispersion models for odour dispersion simulation using field odour data. Before evaluating and calibrating AERMOD and CALPUFF, sensitivity analysis of these two models to five major climatic parameters, i.e., mixing height, ambient temperature, stability class, wind speed, and wind direction, was conducted under both steady-state and variable meteorological conditions. It was found under steady-state weather condition, stability class and wind speed had great impact on the odour dispersion; while, ambient temperature and wind direction had limited impact on it; and mixing height had no impact on the odour dispersion at all. Under variable weather condition, maximum odour travel distance with odour concentrations of 1, 2, 5 and 10 OU/m3 were examined using annual hourly meteorological data of year 2003 of the simulated area and the simulation result showed odour traveled longer distance under the prevailing wind direction. Evaluation outcomes of these two models using field odour data from University of Minnesota and University of Alberta showed capability of these two models in odour dispersion simulation was close in terms of agreement of modeled and field measured odour occurrences. Using Minnesota odour plume data, the difference of overall agreement of all field odour measurements and model predictions was 3.6% applying conversion equation from University of Minnesota and 3.1% applying conversion equation from University of Alberta between two models. However, if field odour intensity 0 was not considered in Minnesota measured odour data, the difference of overall agreement of all field odour measurements and model predictions was 3.1% applying conversion equation from University of Minnesota and 1.6% applying conversion equation from University of Alberta between two models. Using Alberta odour plume data, the difference of overall agreement of all field odour measurements and model predictions was 0.7% applying conversion equation from University of Alberta and 1.2% applying conversion equation from University of Minnesota between two models. However, if field odour intensity 0 was not considered in Alberta measured odour data, the difference of overall agreement of all field odour measurements and model predictions was 0.4% applying conversion equation from University of Alberta and 0.7% applying…