|Institution:||University of Skövde|
|Keywords:||Explicit finite element analysis; double cantilever beam; end notched flexure; critical time step; Engineering and Technology; Mechanical Engineering; Teknik och teknologier; Maskinteknik; TECHNOLOGY; Engineering mechanics; TEKNIKVETENSKAP; Teknisk mekanik; Mechanical Engineer; Maskiningenjör - inriktning mot konstruktion; Teknik; Technology; teknik; Technology|
|Full text PDF:||http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-3895|
A research group at University of Skövde has developed an interphase element for implementation in the commercial FE-software Abaqus. The element is using the Tvergaard & Hutchinson cohesive law and is implemented in Abaqus Explicit version 6.7 using the VUEL subroutine. This bachelor degree project is referring to evaluate the interphase element and also highlight problems with the element. The behavior of the interphase element is evaluated in mode I using Double Cantilever Beam (DCB)-specimens and in mode II using End Notch Flexure (ENF)-specimens. The results from the simulations are compared and validated to an analytical solution. FE-simulations performed with the interphase element show very good agreement with theory when using DCB- or ENF-specimens. The only exception is when an ENF-specimen has distorted elements. When using explicit finite element software the critical time step is of great importance for the results of the analyses. If a too long time step is used, the simulation will fail to complete or complete with errors. A feasible equation for predicting the critical time step for the interphase element has been developed by the research group and the reliability of this equation is evaluated. The result from simulations shows an excellent agreement with the equation when the interphase element governs the critical time step. However when the adherends governs the critical time step the equation gives a time step that is too large. A modification of this equation is suggested.