AbstractsEngineering

Slow-response generator

by Adam Davidsson




Institution: Högskolan i Halmstad
Department:
Year: 2015
Keywords: Slow-response; EGR; Engineering and Technology; Electrical Engineering, Electronic Engineering, Information Engineering; Signal Processing; Teknik och teknologier; Elektroteknik och elektronik; Signalbehandling; Elektroteknik; Electrical Engineering
Record ID: 1345140
Full text PDF: http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-27527


Abstract

Because of environmental pollution, forces the automotive industry constantly reduced emissions requirements legislated by the authorities. Improved techniques for engine control are a must for bringing down emissions. The use of an Exhaust Gas Recirculation (EGR) reduces NOx emissions significantly. Faulty EGR valves affect the emissions negative and therefore needs to be eliminated. It is possible to create malfunctions on the EGR valve by modifying the software of the control unit (ECU), but it does not create realistic malfunctions. The problem by modifying the software is that flags and various parameters are set to confirm the malfunction of the ECU. To create actual failure of the EGR valve an external tool to modify the control signal is needed. The project's main objective is on a flexible way creating malfunctions on the EGR valve in a truck engine. By investigating engine behavior in a realistic and credible way, one can eliminate malfunctions on the EGR valve. The aim was achieved by a model that has been developed that can, using electronics and a microprocessor read and create a control signal. The electronic circuit is controlled by the microprocessor, which can modify the signal and create malfunctions in the form of a slow valve "slow-response". A graphical user interface is used to change and influence the error signal. The circuit with the microprocessor is placed safely in a box to both protect and preserve the components. Simulation of Slow response has resulted in an incorrect operated valve being created. Using two different methods a Slow-response can be created. One method is a delay in time, which occurs when the new position is given, the second method is a ramp function when the control signal is gradually increasing. The software can also create an error that mimics a stuck valve of a fixed value. With the above listed methods it is possible in theory to find unknown malfunctions on the EGR valve that influence emissions negatively.