AbstractsEngineering

The purpose of this research is to investigate the seismic behavior of plane moment resisting frames (MRFs) consisting of concrete filled steel tube (CFT) columns and steel I beams through targeted studies utilizing advanced computational methodologies calibrated on the basis of existing experimental results and to propose a preliminary performance-based seismic design method for this kind of frames.A computational study is conducted first to investigate the nonlinear cyclic response of square concrete-filled steel tubes (CFT) in bending and compression. An accurate nonlinear finite element model is created and its validity is established by comparing its results with those of existing experiments. Using this finite element model, extensive parametric studies are performed to provide information on the hysteretic and deteriorating behavior of CFT columns. Thus, on the basis of this computational study, three simple yet sufficiently accurate concentrated plasticity hysteretic models for simulating the cyclic behavior of square concrete-filled steel tube (CFT) columns, are developed.The seismic behavior of plane MRFs consisting of I steel beams and CFT columns is investigated next. More specifically, the effect of modelling details of each individual component of CFT-MRFs, such as the CFT columns, the beam-column connections, the panel zones and the steel I beams, on their seismic behavior is studied through comparisons against available experimental results. Then, fragility curves are constructed for composite frames for various levels of modelling sophistication through nonlinear time history analyses involving three typical CFT-MRFs which have been designed according to the European seismic design codes. On the basis of these fragility curves, one can select the appropriate modelling level of sophistication that can lead to the desired seismic behavior for a given seismic intensity. The third part of this work deals with the establishment of all the necessary ingredients for this kind of composite frames to be seismically designed by the performance-based hybrid force-displacement (HFD) seismic design method, which combines the advantages of the well-known force-based and displacement-based seismic design methods. Thus, extensive parametric studies are conducted involving nonlinear dynamic analysis of 96 frames under 100 seismic motions in order to create a databank with the response quantities of interest. Based on regression analysis, simple formulae for estimating the maximum roof displacement, the maximum inter-storey drift ratio, the maximum rotation ductility along the height of the frame and the behavior factor are developed.Comparison of the proposed design method with those adopted by current seismic design codes demonstrates that the proposed procedure seems to be more rational and controls deformation better than current seismic design codes. Nonlinear time history analyses proved the consistency of the proposed method to accurately estimate inelastic deformation demands and the tendency of the current…