AbstractsBiology & Animal Science

Kogenerační zdroj

by Lukáš Jančok




Institution: Brno University of Technology
Department:
Year: 0
Keywords: kogenerace; Sibiř; biomasa; ostrovní zdroj energie; protitlaková turbína; malá teplárna; biomass; cogeneration; back-pressure steam turbine; Siberian-like climate application; off-grid application; off-the-grid
Record ID: 1097148
Full text PDF: http://hdl.handle.net/11012/23939


Abstract

V diplomové práci je krok po kroce vypracováno řešení zabezpečení energetického zdroje pro typické město v Sibiřské oblasti. Data, která tvoří zadání, byla získána od zákazníka pomocí dotazníku, protože pro nás oblast v čase vypracování nebyla dostupná. Na základě informací o aktuální energetické situaci, obyvatelstvu a dřevospracujícímu průmyslu je vybrána vhodná technologie pro zabezpečení tepla a elektrické energie. Druh zdroje byl vybrán dle dostupného paliva a následně byl proveden výpočet a design en- ergetického zdoje založeného na Rankine Clausiovém cyklu. Řešení obsahuje technický i ekonomický návrh. Technické řešení ukázalo, že nejdůležitější parametry jsou spolehlivost, bezpečnost a jednoduchost řešení. Design sítí, přídavných zařízení a plánování údržby není obsahem této práce. O dalších projektových krocích pojednává závěr.; This thesis deals with providing both electric power and heat for an ordinary Siberian town. On site observation and measurements to determine the local conditions were not an option. Hence information gathering is presented. It covers the energy situation for the public and for the wood processing plant. The technical part of the thesis starts with a review of an existing technology. The options are presented, and the decision is to recom- mend particular new system based on the Rankine cycle. At such distant location power source depends very strongly on the available combustible resources. This thesis presents also the evaluation of economics. The main objective was to carry out an analysis and design an adequate and economical cogeneration application where the most important criteria are reliability, safety and simplicity. Design of auxiliary equipment and heat distribution network are not in the scope of this thesis. The conclusion deals also with next recommended steps.